Diversified_water_dropL_9095.pngDFC_Water_Drop_6450.png

Boilers and Water Heaters

raypak-rheem-logo-official_6874.jpgMVB.png

Diversified Fluid Controls is a Manufacture Representative of Raypak Hydronic Heating and Graham Engineering Answers. For more information on our Boilers and Water Heaters contact one of our Sales Representatives.

Modulating Vertical Boilers & Water Heaters

Raypak Hydronic Heating


Domestic Water Heaters:

(Click on MBTU for more information below)

 

MVB 500k-2M BTU 87%

MVB 500k-2M BTU 85%

 

Hydronic Boilers:

(Click on MBTU for more information below)

 

MVB 500k-2M BTU 87%

MVB 500k-2M BTU 84%


 

Key Features


12 models from 500,000 to 2,000,000 BTUH
Up to 85% efficiency (Cat. I*);
Up to 88.4% efficiency (Cat. IV)
No boiler condensate drain required (proprietary design)
Lowest minimum required inlet water temperature (120F)
Modulating gas valve and burner, up to 4:1 (503 thru 2003) turndown
Engineered with precisely matched system components
Smallest installed footprint (5.4 square feet) design fits tight spaces and easily replaces larger boilers
Advanced diagnostics center, real English fault codes
All models indoor/outdoor certified
Complete cabinet protects all controls and wiring
Meets all current Low NOx regulations, including the new 2010 SCAQMD revisions
Suitable for altitudes up to 10,000 ft. (derate above 5,000 ft.)
With all copper and optional bronze waterways, the MVB is available in boiler and water heater configurations

Hi Delta® Sealed Combustion Boilers & Water Heaters

Raypak Hydronic Heating


Domestic Water Heaters:

 (Click on MBTU for more information below)

 

101-400 BTU
302-902 BTU

992-2342 BTU

FlexGas 302-2942 BTU

 

Hydronic Boilers:

 (Click on MBTU for more information below)

 

101-401 BTU
302-902 BTU

992-2342 BTU

FlexGas 302-902 BTU

FlexGas 992-2342 BTU

302-902 BTU 87%

992-2342 BTU 87%


 

Key Features

18 models from 120,000 to 2,340,000 BTUH
Efficiency
a) Boilers - 84% standard; 87% optional on Models 302A-2342A
b) Water Heaters – 85% standard
c) 98% condensing system available (See Hi Delta with CHX)
105ºF minimum inlet water capability on standard models; 120°F on 87% boilers
Copper fin tube heat exchanger; Cupro-Nickel available
Bronze headers standard on water heaters, optional on boilers
Sidewall venting ready; No extractor needed for most applications
Ducted combustion air-ready; TruSeal™ CSA-certified direct-vent available
Status display and advanced diagnostic lights for easy troubleshooting
Meets all NOx regulations

hi-delta-group.png

Delta Limited Water Heaters

Raypak Hydronic Heating



Domestic Water Heaters:

 (Click on MBTU for more information below)

 

399-899 BTU

989-2339 BTU

 

Hydronic Boilers:

 (Click on MBTU for more information below)

 

399-899 BTU
989-2339 BTU

 

Key Features

98% thermal efficiency at full fire
Top or rear CHX mounting options: low profile or small footprint, your choice!
400,000 - 2,000,000 BTUH in single boiler configurations;

       up to 4,000,000 BTUH using racked boiler / CHX systems
Improved load-tracking with up to eight firing stages
Self-contained secondary heat exchanger can be inspected and

       maintained without disturbing the vent or plumbing connections
Exceeds all NOx emission standards
Straight tube heat exchanger outlasts other designs and facilitates

       scale-free operation – ideal for DHW applications
Fully-engineered rack systems simplify jobsite installation and set-up
Indoor / Outdoor installation
Fully certified vent systems available
Full range of control options offering Building Management System

       compatibility and single-source accountability
Front-access boiler controls, burner and heat exchanger

Hi-Delta-with-CHX_8905.png

Raytherm® Atmospheric Boilers & Water Heaters

Raypak Hydronic Heating


Domestic Water Heaters:

 (Click on MBTU for more information below)

 

133 BTU

182-400 BTU

Low NOx 181-401 BTU

514-824 BTU

Outdoor 926-1758 BTU

Indoor 962-1826 BTU

2100-4001 BTU

 

Hydronic Boilers:

 (Click on MBTU for more information below)

 

133 BTU 

182-400 BTU

Low NOx 141-401 BTU 

Indoor/Outdoor 514-824 BTU

Outdoor 926-1758 BTU

Indoor 962-1826

Indoor 2100-4000 BTU

 



Key Features


32 Models
66,000 to 4,000,000 BTUH input
Modulating models with 5:1 turndown
Indoor and outdoor models available
Easy start-up and low maintenance

Raytherm.png

EconoPak® Atmospheric Water Heaters
Raypak Hydronic Heating


Domestic Water Heaters:

 (Click on MBTU for more information below)

 

90-195 BTU

260-400 BTU

 


 

Key Features


All Non-ferrous Waterways
Low Lead Verified
Factory mounted and wired stainless steel pump (Piping by others)
Super Fast Recovery - Consistent 140°F water delivery, even during peak demand times
High Efficiency - Up to 82% thermal efficiency
Long Service Life (Four times longer than average tank-type heaters)
Compact - Fits in small equipment rooms
6 Models
90,000 to 399,000 BTUH input
On/Off firing
Indoor and outdoor models available
Easy start-up and low maintenance
Backed by a twenty-year limited warranty

Econopakweb_copy.png

XTherm® Condensing Boilers & Water Heaters

Raypak Hydronic Heating


General Information | Specifications and Submital



Key Features


3 models - 1,000,000, 1,500,000 and 2,000,000 BTUH
Up to 96% efficiency (Cat.IV) hydronic boiler
Up to 97% efficiency (Cat. IV) domestic hot water UP to 99% part load
Can be optionally vented with PVC - use option D-32
Small footprint design, less than 11 square feet, fits tight spaces and easily replaces larger boilers
On-board diagnostic center, real English, no cryptic codes MORE INFO!
Built in Cold Water Run System MORE INFO!
Modulating gas valve and burner, up to 4:1 turndown.
All models indoor/outdoor certified
Complete cabinet protects all controls and wiring
Meets all current Low NOx regulations, including the new 2010 SCAQMD revisions
Suitable for altitudes up to 10,000 ft. (derate above 5,000 ft.)
Water heater models are equipped with all copper and bronze waterways
Boiler models are equipped with cast iron headers and pumps with the option to upgrade to bronze waterways
0-10 VDC Remote set point BMS interface
0-10 VDC Direct Drive

XTherm-hero-with-leaf.png

XFyre™ Condensing Boilers & Water Heaters

Raypak Hydronic Heating


General Information | Specifications and Submital



Key Features


3 models - 300,000, 500,000 and 850,000 BTUH
Up to 94% efficiency (Cat.IV) hydronic boiler
Up to 94% efficiency (Cat. IV) domestic hot water UP to 99% part load
Standard unit configuration can be vented with PVC
Small footprint design, less than 9-1/2 square feet, fits tight spaces and easily replaces larger boilers
Onboard diagnostic center, real English, no cryptic codes MORE INFO!
Fully UV protected and weather proof control panel - conveniently located and easy to use
Minimum inlet temperature - above 32°F
Modulating gas valve and burner, up to 5:1 turndown.
All models indoor and outdoor certified-XFyre is the only condensing boiler with CSA outdoor approval
Complete cabinet protects all controls and wiring
Meets all current Low NOx regulations, including the new 2010 SCAQMD revisions
Suitable for altitudes up to 2,000 ft.
All models equipped with 316L stainless steel heat exchanger - ASME H stamped
0-10 VDC inputs for BMS interface
8-boiler cascade capability - Standard equipment

Xfyre-200x436.png

Instant-Pak Commercial Tankless from Raypak

Raypak Hydronic Heating


General Information



Key Features


208 DV indoor direct vent and 208X outdoor natural and LP models - 11,000-199,900 BTU max

188DV indoor direct vent and 188X outdoor natural and LP models - 11,000 - 180,000 BTU max


3"/5" Concentric Vent System with Integrated Condensate Collector
Connects to Metal Fab Inc., 3"/5" Concentric Venting without an adapter
Next Generation Burner Technology
Industry Best! .26 GPM Minimum Flow Rate, .40 GPM Minimum Activation Flow Rate
UMC-117 remote control and 10 ft. of thermostat wire is included
EZ-Link™ cable available for high demand applications to connect two tankless heaters to operate as one
Manifold up to 6 units with an optional MIC-6 manifold control board
Exclusive! All Raypak models can be linked in up to 20 unit
manifold installations by using the optional MIC-185 and MICS-185 manifold control assembly
High-altitude capability – up to 9,840 ft. elevation above sea level
Exclusive! Guardian OFW™ overheat film wrap
All Raypak tankless models are third-party efficiency certified by AHRI
Continuous hot water, energy saving and compact, space saving design
Intelligent electronic controls designed to increase energy efficiency and safety Self Diagnostic System
Digital display shows temperature setting and maintenance codes
Integral electric blower
Environmentally friendly Low NOx burner meets SCAQMD rule 1146 requirements
Freeze protection to -30° F
5-Year on heat exchanger and parts, 1-Year on labor
See Warranty Information Certificate for complete warranty information.


instantpak_copy.png

Don't see what you're looking for? Contact one of our Sales Representatives to see if we have it! Contact Us

Hot Water Storage Tanks

 

General Information



Key Features


125 PSI pressure rating (standard)
150 PSI pressure rating available
Vertical (150 PSI optional) or Horizontal
Manhole access
Angle iron legs on vertical tanks
Saddles available on horizontal tanks
Available openings in:
      Threaded
      Flanged
      Stainless steel
Optional double glass lining
Available linings:
      Glass
      Epoxy
      Cement
National Board stamped
Magnesium anodes (glass lined tanks only)
Lifting lugs


Custom-tank-vertical.pngGraham.GIF

MicroMix II MicroMax

Graham Engineering


General Information



Key Features


Graham MicroMix II / MicroMax water heater units are used

anywhere hot water is required, as long as steam is available.

Most commonly, they have been supplied for shower systems in

universities, hospitals, governmental facilities, hotels, apartment

complexes, and institutions.

Other applications for Graham water heaters include:

 industrial safety showers/eye wash stations
 wash down systems
 jacket heating systems
 lavatories/showers
 cafeterias
 process heaters
 food processing
 pulp & paper
 pharmaceutical


graham_micro_6722.png

Loading